Synthesis
SiliCycle offers silica-based products that can be used in organic synthesis in replacement of homogeneous equivalents. In many cases, supported reagents have distinct advantages over their solution-phase counterparts, the biggest one being the ability to do multiple transformations in a single pot, the immobilization of toxic reagents, and increased selectivity. They are also suitable for use in batch reactions and in flow through applications.
Application Notes
All available applications developed for synthesis purposes are listed below:
General applications
- Common Organic Reactions
For amide and ester synthesis refer to the following link for more information
Other applications
- Use of SiliaBond Cyanoborohydride
- Use of SiliaBond Carbonate
- Difference Between SiliaBond PCC & PDC: When to Use Them?
SiliaBond Kit
- SiliaBond Reagents Kit for Microwave Applications
22 Item(s)
List Grid
-
SiliaPrep™ SPE Cartridges Amine (WAX)
SiliaPrep Amine is a weak anion exchanger sorbent used in replacement of SAX for strong anions to avoid irreversible retention. Can also be employed as a metal scavenger and norman phase conditions.
-
SiliaPrep™ SPE Cartridges Amine nec (WAX)
SiliaPrep Amine nec is a weak anion exchanger sorbent used in replacement of SAX for strong anions to avoid irreversible retention. Can also be employed as a metal scavenger and norman phase conditions.
-
SiliaPrep™ SPE Cartridges Carboxylic Acid (WCX)
SiliaPrep Carboxilic Acid is a weak cation exchanger sorbent (WCX) used to extract strong basics compounds.
-
SiliaPrep™ SPE Cartridges Carboxylic Acid nec (WCX)
SiliaPrep Carboxilic Acid nec is a weak cation exchanger sorbent (WCX) used to extract strong basics compounds.
-
SiliaPrep™ SPE Cartridges Piperazine (SPE-R60030B)
SiliaPrep Piperazine is a weak anion exchanger that can be used in replacement of SAX and SAX-2 for strong anions to avoid irreversible retention. By using this phase, elution can be done at a lower pH (around pH 8-9) comparatively to the SiliaPrep Amine.
-
SiliaPrep™ SPE Cartridges Diethylamine (WAX-2)
SiliaPrep Diethylamine (WAX-2) is a weak anion exchanger that can be used in replacement of SAX and SAX-2 for strong anions to avoid irreversible retention. This phase presents a slightly lower capacity and a moderate non polar character due to the alkyl chain on the amino function. Moreover, it can be employed as metal scavenger and in normal phase conditions.
-
SiliaPrep™ SPE Cartridges TMA Acetate nec
SiliaPrep TMA Acetate (SAX-2) is a strong anion exchanger sorbent with a low selectivity acetate counter ion already in place. This sorbent retains more favorably acidic compounds with pKas <5, such as carboxylic acid.
-
SiliaPrep™ SPE Cartridges Tosic Acid (SCX)
SiliaPrep Tosic Acid (SCX) is a strong cation exchanger and maintains a negative charge throughtout the pH scale. The most common use is a strong cation exchanger for the amine and basics molecules "catch and release" purification technique in SPE cartridges.
-
SiliaPrep™ SPE Cartridges Tosic Acid nec (SCX)
SiliaPrep Tosic Acid is a strong cation exchanger and maintains a negative charge throughtout the pH scale. The most common use is a strong cation exchanger for the amine and basics molecules "catch and release" purification technique in SPE cartridges.
-
SiliaPrep™ SPE Cartridges Propylsulfonic Acid (SCX-2)
SiliaPrep Propylsulfonic Acid (SCX-2) is a strong cation exchanger and maintains a negative charge throughtout the pH scale. The most common use is a strong cation exchanger for the amine and basics molecules "catch and release" purification technique in SPE cartridges.
-
SiliaPrep™ SPE Cartridges Propylsulfonic Acid nec (SCX-2)
SiliaPrep Propylsulfonic Acid nec is a strong cation exchanger and maintains a negative charge throughtout the pH scale. The most common use is a strong cation exchanger for the amine and basics molecules "catch and release" purification technique in SPE cartridges.
-
SiliaPrep™ SPE Cartridges Carbonate
SiliaPrep Carbonate (or Si-CO3) is the silica bound equivalent of tetramethyl ammonium carbonate. It can be used as a general base to quench a reaction, to free base amines in their ammonium salt form and to scavenge acids, boronic acids and acidic phenols, including HOBt, which is widely used in amide coupling reactions.
-
SiliaPrep™ SPE Cartridges Carbodiimide (DCC)
SiliaPrep Dichlorotriazine has been designed as a reagent for amide coupling applications.
-
SiliaPrep™ SPE Cartridges Dichlorotriazine (DCT)
SiliaPrep Dichlorotriazine has been designed as a reagent for amide coupling applications.
-
SiliaPrep™ SPE Cartridges Diamine
SiliaPrep diamine can be used in replacement of SAX for strong anions to be irreversible retention. Can also be employed as metal scavenger and in normal-phase conditions.
-
SiliaPrep™ SPE Cartridges Diamine nec
SiliaPrep diamine can be used in replacement of SAX for strong anions to be irreversible retention. Can also be employed as metal scavenger and in normal-phase conditions.
-
SiliaPrep™ SPE Cartridges Triamine
SiliaPrep Metal Scavengers will lower the residual metal concentration of various metal complexes to single digit ppm.
-
SiliaPrep™ SPE Cartridges Thiol
SiliaPrep Metal Scavengers will lower the residual metal concentration of various metal complexes to single digit ppm.
-
SiliaPrep™ SPE Cartridges Thiourea
SiliaPrep Metal Scavengers will lower the residual metal concentration of various metal complexes to single digit ppm.
-
SiliaPrep™ SPE Cartridges TAAcOH
SiliaPrep Metal Scavengers will lower the residual metal concentration of various metal complexes to single digit ppm.
-
SiliaPrep™ SPE Cartridges Dimercaptotriazine (DMT)
SiliaPrep Metal Scavengers will lower the residual metal concentration of various metal complexes to single digit ppm.
-
SiliaPrep™ SPE Cartridges TMA Chloride nec (SAX)
SiliaPrep TMA Chloride (SAX) is a strong anion exchanger sorbent positively charged under all conditions used to extract acid molecules (pKa 3-5).
22 Item(s)
List Grid
- Metal to Remove
- Family / Formats
- Phases
-
- Amine (2)
- Carbodiimide (DCC) (1)
- Carbonate (1)
- Carboxylic Acid (WCX) (2)
- Diamine (2)
- Dichlorotriazine (DCT) (1)
- Diethylamine (WAX-2) (1)
- Dimercaptotriazine (DMT) (1)
- Piperazine (1)
- Propylsulfonic Acid (SCX-2) (2)
- TAAcOH (1)
- Thiol (1)
- Thiourea (1)
- TMA Acetate (1)
- TMA Chloride (SAX) (1)
- Tosic Acid (SCX) (2)
- Triamine (1)
- Pore Size
-
- 60 Å (22)
- Endcapping
-
- Endcapped (22)
- Non-endcapped (5)
- Cartridges Volume
- Particle Size
Collapse All | Expend All
Our Catalogs
Get the SiliCycle Catalogs, they are free.
New
To order your free hard copy, please click here and register first.