Follow SiliCycle on Facebook Follow SiliCycle on Twitter Follow SiliCycle on LinkedIn Watch our videos on Youtube

E-PAK Lab Scale Cartridges

E-PAK lab scale cartridges

To facilitate the evaluations of small samples, Graver & SiliCycle can provide loose media and lab scale cartridges on a custom basis.
Testing with loose media can be done with samples as small as a few milliliters and are normally done in advance of cartridge testing to identify the formula with the highest capacity to remove contaminants with the least loss of product.

E-PAK lab cartridges are generally used for processing samples of 50 ml or more. Testing in Gravers’ laboratory has shown good correlation between the performance of lab, pilot and commercial size cartridges.

A typical setup for testing E-PAK lab cartridges is shown below.

For additional information on activated carbon selection, see: Organic Process Research & Development, 2005, 9, 198-205.

Sorbent Active Adsorbent Available Sizes Approximated Media Weight
Thiol SiliaMetS Thiol
Silica-Based
5 cm Diameter

  • 1 cm High
  • 10 cm High
  • 25 cm High
  • 1 cm: 8 g
  • 10 cm: 75 g
  • 25 cm: 200 g
DMT SiliaMetS DMT
Silica-Based
C-941 Carbon-Wood
Acid Activated
  • 1 cm: 5 g
  • 10 cm: 50 g
  • 25 cm: 125 g
C-944 Carbon-Coal
Steam Activated
C-947 Carbon-Wood
Acid Activated
C-948 Carbon-Wood
Acid Activated

 

For ordering or more information, please contact:

 

E-PAK lab scale housing kit with 1 cm cartridge

E-PAK lab scale housing kit with 1 cm cartridge.

 

E-PAK lab scale housing kits are available in 3 bowl lengths: 1, 10 & 25 cm

E-PAK lab scale housing kits are available in 3 bowl lengths: 1, 10 & 25 cm.

 

E-PAK lab scale cartridges are used in Lab housing or filter housing using single 222 o-ring seal

E-PAK lab scale cartridges are used in Lab housing or filter housing using single 222 o-ring seal

 

Lab cartridge can be operated with pump (as shown) or small pressure vessel

Lab cartridge can be operated with pump (as shown) or small pressure vessel

 

Pre-screening with E-PAK base adsorbent loose media

Pre-screening with E-PAK base adsorbent loose media