SiliaMetS® Calculation of SiliaMetS to Use
To get an effective metal removal, the amount of SiliaMetS Metal Scavenger used is very important. You can determine by two different ways how much scavenger will be needed;
- from the residual concentration (more accurate method)
- from the amount of metal catalyst used (when the residual metal concentration is unknown)
From residual metal concentration (ppm)
Knowing the palladium (Pd) level in 800 g of material is 500 ppm, (the oxidation state does not affect the calculation).
-
Data needed:
- Loading of the scavenger (SiliaMetS Thiol): 1.2 mmol/g
- Metal molecular weight: Ex. Pd = 106.42 g/mol
- Amount of product to be treated containing the Pd: Ex. 800 g
- Residual concentration of metal: Ex. 500 ppm of Pd
|
1. Determine the amount of palladium to be scavenged |
 |
|
2. Calculate the amount of scavenger (SiliaMetS Thiol) to use (1 equivalent) |
 |
To scavenge 400 mg of palladium, 3.13 g of SiliaMetS Thiol is needed if using only one equivalent. However, it is highly recommend trying a minimum of 4 equivalents at first. In this case, the amount of SiliaMetS Thiol will be 4 times higher (4 x 3.13 g = 12.40 g).
Sometimes, the metal residual concentration is unknown. In such a case, the amount (g) of palladium to be scavenged can be replaced by the amount of metal catalyst used for the reaction:
From amount of metal catalyst used
-
Data needed:
- Amount of metal catalyst used: Ex. 10 g of Pd(PPh3)4
- Metal catalyst molecular weight: Pd(PPh3)4 = 1155.56 g/mol
1. Determine the amount of palladium to be scavenged
The amount of SiliaMetS Thiol to be used can then be determined as stated above (see point 2. above). In this particular case, one equivalent of SiliaMetS Thiol corresponds to 7.20 g.
8 Item(s)
List Grid
-
SiliaPrep™ SPE Cartridges Amine (WAX)
SiliaPrep Amine is a weak anion exchanger sorbent used in replacement of SAX for strong anions to avoid irreversible retention. Can also be employed as a metal scavenger and norman phase conditions.
-
SiliaPrep™ SPE Cartridges Amine nec (WAX)
SiliaPrep Amine nec is a weak anion exchanger sorbent used in replacement of SAX for strong anions to avoid irreversible retention. Can also be employed as a metal scavenger and norman phase conditions.
-
SiliaPrep™ SPE Cartridges Diamine
SiliaPrep diamine can be used in replacement of SAX for strong anions to be irreversible retention. Can also be employed as metal scavenger and in normal-phase conditions.
-
SiliaPrep™ SPE Cartridges Diamine nec
SiliaPrep diamine can be used in replacement of SAX for strong anions to be irreversible retention. Can also be employed as metal scavenger and in normal-phase conditions.
-
SiliaPrep™ SPE Cartridges Triamine
SiliaPrep Metal Scavengers will lower the residual metal concentration of various metal complexes to single digit ppm.
-
SiliaPrep™ SPE Cartridges Thiourea
SiliaPrep Metal Scavengers will lower the residual metal concentration of various metal complexes to single digit ppm.
-
SiliaPrep™ SPE Cartridges TAAcOH
SiliaPrep Metal Scavengers will lower the residual metal concentration of various metal complexes to single digit ppm.
-
SiliaPrep™ SPE Cartridges Dimercaptotriazine (DMT)
SiliaPrep Metal Scavengers will lower the residual metal concentration of various metal complexes to single digit ppm.
8 Item(s)
List Grid
- Metal to Remove
- Family / Formats
- Phases
- Pore Size
-
- 60 Å (8)
- Endcapping
-
- Endcapped (8)
- Non-endcapped (1)
- Bed Weight
- Particle Size
Collapse All | Expend All
Our Catalogs
Get the SiliCycle Catalogs, they are free.
New
To order your free hard copy, please click here and register first.