Follow SiliCycle on Facebook Follow SiliCycle on Twitter Follow SiliCycle on LinkedIn Watch our videos on Youtube

Cartuchos Flash de Escala Laboratorio

Características SiliaSep 4 g SiliaSep 12 g SiliaSep 25 g SiliaSep 40 g
Código del Cartucho ISO04 ISO12 ISO25 ISO40
Peso de sílice No funcionalizada: 4 g
Funcionalizada: ≥ 5 g
No funcionalizada: 12 g
Funcionalizada: ≥ 15 g
No funcionalizada: 25 g
Funcionalizada: ≥ 30 g
No funcionalizada: 40 g
Funcionalizada: ≥ 45 g
Unidades/caja No funcionalizada: 20
Funcionalizada: 2
No funcionalizada: 20
Funcionalizada: 1
No funcionalizada: 15
Funcionalizada: 1
No funcionalizada: 15
Funcionalizada: 1
Dimensiones
(ID x Longitud)
12 x 98 mm 21 x 117 mm 21 x 165 mm 27 x 169 mm
Volumen de columna 4.9 mL 17 mL 31 mL 47 mL
Débito de Flujo Recomendado 15 - 25 mL/min 20 - 40 mL/min 20 - 45 mL/min 25 - 50 mL/min
Capacidad de Carga
(sílice no funcionalizada)
0.040 - 0.4 g 0.120 - 1.2 g 0.250 - 2.5 g 0.400 - 4.0 g
Presión de Operación Máxima 225 psi / 16 bar 225 psi / 16 bar 225 psi / 16 bar 225 psi / 16 bar

Características SiliaSep 80 g SiliaSep 120 g SiliaSep 220 g SiliaSep 330 g
Código del Cartucho ISO80 IS120 IS220 IS330
Peso de sílice No funcionalizada: 80 g
Funcionalizada: ≥ 90 g
No funcionalizada: 120 g
Funcionalizada: ≥ 130 g
No funcionalizada: 220 g
Funcionalizada: ≥ 230 g
No funcionalizada: 330 g
Funcionalizada: ≥ 360 g
Unidades/caja No funcionalizada: 12
Funcionalizada: 1
No funcionalizada: 10
Funcionalizada: 1
No funcionalizada: 4
Funcionalizada: 1
No funcionalizada: 4
Funcionalizada: 1
Dimensiones
(ID x Longitud)
31 x 237 mm 36 x 256 mm 60 x 195 mm 60 x 268 mm
Volumen de columna 123 mL 190 mL 306 mL 441 mL
Débito de Flujo Recomendado 40 - 80 mL/min 60 - 120 mL/min 60 - 180 mL/min 80 - 180 mL/min
Capacidad de Carga
(sílice no funcionalizada)
0.800 - 8.0 g 1.2 - 12.0 g 2.2 - 22.0 g 3.3 - 33.0 g
Presión de Operación Máxima 205 psi / 13 bar 206 psi / 13 bar 160 psi / 11 bar 160 psi / 11 bar

Características SiliaSep XL 800 g SiliaSep XL 1,600 g
Código del Cartucho IS750 I1500
Peso de sílice No funcionalizada: 800 g
Funcionalizada: ≥ 870 g
No funcionalizada: 1,600 g
Funcionalizada: ≥ 1,700 g
Unidades/caja No funcionalizada: 2
Funcionalizada: 1
No funcionalizada: 2
Funcionalizada: 1
Dimensiones
(ID x Longitud)
78 x 382 mm 104 x 429 mm
Volumen de columna 1,500 mL 2,900 mL
Débito de Flujo Recomendado 200 - 300 mL/min 300 - 450 mL/min
Capacidad de Carga
(sílice no funcionalizada)
8.0 - 80.0 g 16.0 - 160.0 g
Presión de Operación Máxima 128 psi / 8 bar 100 psi / 7 bar

10 Item(s)

Set Descending Direction
per page

List  Grid 

  1. SiliaSep Flash Cartridges, Diol, 25 µm, 90 Å (FLH-35095D-A)

    SiliaSep Flash Cartridges, Diol, 25 µm, 90 Å (FLH-35095D-A)

    Good alternative for difficult separation of low to medium polarity samples. Useful for mono and polysaccharides separation. Can be used in HILIC mode.
  2. SiliaSep Flash Cartridges, Silica, 40 - 63 µm, 60 Å (FLH-R10030B)

    SiliaSep Flash Cartridges, Silica, 40 - 63 µm, 60 Å (FLH-R10030B)

    Most popular sorbent for day-to-day use for the purification of non-ionic polar organic compounds.
  3. SiliaSep Flash Cartridges, HP Silica, 15 - 40 µm, 60 Å (FLH-R10017B)

    SiliaSep Flash Cartridges, HP Silica, 15 - 40 µm, 60 Å (FLH-R10017B)

    High Performance sorbent for difficult separations (isomers). Higher loading capacity. Faster flow rate. Less solvent used.
  4. SiliaSep Flash Cartridges, Amine (WAX), 40 - 63 µm, 60 Å (FLH-R52030B)

    SiliaSep Flash Cartridges, Amine (WAX), 40 - 63 µm, 60 Å (FLH-R52030B)

    Good alternative for normal phase purification of compounds with basic properties, which would normally have to be purified by reversed-phase. Also a weak anion exchanger, with a pKa of 9.8. At pH 7.8 or below, the functional groups are positively charged. It facilitates the rapid release of very strong anions such as sulfonic acids that may be too strongly retained on SAX.
  5. SiliaSep Flash Cartridges, Diol nec, 40 - 63 µm, 60 Å (FLH-R35030B)

    SiliaSep Flash Cartridges, Diol nec, 40 - 63 µm, 60 Å (FLH-R35030B)

    Good alternative for difficult separation of low to medium polarity samples. Useful for mono and polysaccharides separation. Can be used in HILIC mode.
  6. SiliaSep Flash Cartridges, Cyano (CN), 40 - 63 µm, 60 Å (FLH-R38030B)

    SiliaSep Flash Cartridges, Cyano (CN), 40 - 63 µm, 60 Å (FLH-R38030B)

    Versatile sorbent that can be used either as normal or reversed-phase. Indicated for products with intermediate to extreme polarity. The slightly hydrophobic nature of the cyano group offers alternative selectivity.
  7. SiliaSep Flash Cartridges, C18 (17%) monomeric, 40 - 63 µm, 60 Å (FLH-R33230B)

    SiliaSep Flash Cartridges, C18 (17%) monomeric, 40 - 63 µm, 60 Å (FLH-R33230B)

    Indicated for the purification of low to high polarity compounds. Provides reproducible purification without the complexity and cost of preparative HPLC.
  8. SiliaSep Flash Cartridges, Propylsulfonic Acid (SCX-2), 40 - 63 µm, 60 Å (FLH-R51230B)

    SiliaSep Flash Cartridges, Propylsulfonic Acid (SCX-2), 40 - 63 µm, 60 Å (FLH-R51230B)

    Due to the very low pKa (< 1), Propylsulfonic Acid is a strong cation exchanger and maintains a negative charge throughout the pH scale. The most common use is likely for catch and release purification of weak cations.
  9. SiliaSep Flash Cartridges, TMA Chloride (SAX) nec, 40 - 63 µm, 60 Å (FLH-R66530B)

    SiliaSep Flash Cartridges, TMA Chloride (SAX) nec, 40 - 63 µm, 60 Å (FLH-R66530B)

    Packed with a strong anion exchanger, they can be used to fully retain acidic compounds for clean-up or to isolate them by "catch and release" process.
  10. SiliaSep Flash Cartridges, TMA Acetate (SAX-2) nec, 40 - 63 µm, 60 Å (FLH-R66430B)

    SiliaSep Flash Cartridges, TMA Acetate (SAX-2) nec, 40 - 63 µm, 60 Å (FLH-R66430B)

    Packed with a strong anion exchanger, they can be used to fully retain acidic compounds for clean-up or to isolate them by "catch and release" process. The acetate counter-ion is easily exchangeable (more than the chloride ion).

10 Item(s)

Set Descending Direction
per page

List  Grid